Mica pigment and pearlescent pigment are widely used in automotive coatings, cosmetics, plastics, printing inks, and decorative finishes. Although the two terms are often used interchangeably, they refer to different materials and functions. Understanding the difference is important when selecting...
Two suppliers quote the same shade name and ship two powders with no shared chemistry: different substrate, different composition, different price. The word on the bag names an optical effect, not a material. The answer is INCI, read against particle size, and it holds for every product in this grou...
You spray two panels with the same pigment from the same container. One delivers a clean green-to-violet travel. The other looks flat grey. Your first call goes to the supplier. It should go to the film. Nine categories of coating defect trace back to causes that sit upstream of the pigment grade, a...
Two converters run the same fluorescent powder on the same machine. Eighteen months later, one part is still bright and the other has gone chalky. The pigment is rarely the difference. What decides the outcome is what sits under the colour, how thick the colour layer is, and what covers it — t...
A request lands on your desk — can you take the TiO₂ out — and it arrives wearing one of three different faces. Titanium dioxide alternatives in pearlescent pigments are not one subject, because the three requests do not lead to the same material. This page is about the TiO₂ coating on a...
Sixteen photochromic grades all carry the word reversible in their description, but a moulded part made from any of them can lose the effect after a few months outdoors. The term tells you the molecule returns to its starting form when ultraviolet light stops. It does not tell you how many times tha...
Treated seed is coloured because a federal rule says so, and buyers routinely read that rule wider than it goes. 40 CFR 153.155(a) sets a condition on any pesticide product sold for seed treatment: it must carry an EPA-approved dye.[3] The dye is not a pigment, the colour is not specified, and not e...
Food grade pearlescent pigments are used to give cakes, chocolates, confectionery, and selected beverages a shimmering, metallic, or pearl-like finish. From gold wedding cake decorations to sparkling cocktail drinks, edible luster dust helps food manufacturers and professional decorators create vis...
Cosmetic grade pearlescent pigments are widely used by makeup manufacturers to create shimmer, soft-focus radiance, metallic reflection, and multidimensional color effects. From pressed eyeshadows and loose powders to highlighters, blushes, lip products, and nail cosmetics, the right pearlescent pi...
Too much pigment is the standing explanation for a pale pearl bait, and it is only one of four. The other three leave the same washed-out body. Orientation is the usual culprit: a platelet that never turned has nothing to flash back at you, and no extra gram of powder puts it right. What follows set...
A dull slime is almost never short of pigment. The shine was fixed the moment the activator closed the network, and no amount of powder added afterwards brings it back — only flakes, which sparkle on their own, keep glinting. What follows walks through it in the order it happens on the bench,...
The question underneath every pearl-finish complaint is whether the pigment failed. Most of the time something else did, and the coat stack says which layer before any sample leaves the building. This page orders the checks by what they cost rather than by how strongly each cause is suspected, and s...