Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Special Effect Pigments
Home Special Effect Pigments

Aluminum Pigment: Face-Safe Powder and Mirror Silver Paste

Aluminum Pigment: Face-Safe Powder and Mirror Silver Paste

Dry powder listed for face and eye-area use, plus mirror silver paste in solvent, water and holographic grades. Confirm market and shipping class first.

  • Item No. :

    Aluminum Pigment Powders; Aluminum Silver Paste
  • Color Effect :

    Fine Silver, Metallic Silver, Shine Silver, Glitter Metallic Silver, Olive Green, Dragon Gold, Shine Flame Red, plus mirror silver and holographic pastes
  • Particle Size :

    Powder 15–145 μm; paste 8–35 μm
  • Composition :

    Aluminum flake; paste grades are the same flake pre-dispersed in a solvent or a passivated water carrier
  • Brand :

    Kolortek / OEM
  • MOQ :

    Confirmed per form and destination port
  • Application :

    Coatings, printing inks, nail systems, plastics and decorative finishes

Aluminum pigment leaves us in one of two containers, and the container decides more than the colour does. Dry powder is listed for face and eye-area use and ships as general goods. Silver paste is a liquid, classified as dangerous goods. Settle those two points against your market and your forwarder before you compare shades.

Before you compare shades
Powder: face and eye-area listing, general goods.
Paste: dangerous goods, released only after the documentation check.
Waterborne paste: passivated, and not a drop-in for the solvent grade.

What Actually Ships: Dry Powder or Wet Paste

The same metal is supplied in two forms. What differs is what the flake is packed in, and that affects how each form is handled and shipped.

Property Dry powder Silver paste
Physical form Dry powder Flake held in a liquid carrier
Listed for Face and eye-area use Nail use at the fine end; industrial coatings and printing
Particle size 15–145 μm 8–35 μm
Transport General goods Dangerous goods; sample and shipment release confirmed with our documentation team first
Shear Dry blending and low-shear dispersion Low shear; holographic flake can lose its pattern under excessive shear

The powder range covers 15–45, 35–55, 35–75, 55–75 and 55–145 μm. Paste sizes are 8, 10, 12, 20 and 35 μm. These ranges describe the available particle sizes; which one suits a job depends on its application and finish.

Two buyers asking for the same colour may therefore need different checks before shipment. The form determines whether the dangerous-goods confirmation applies.

Aluminum pigment powder range in piles with clear sampling jars

Fig. 1 — Powder range with the sampling jars it is despatched in.

Dry aluminum powder beside the same metal dispersed into silver paste

Fig. 2 — The same metal twice: dry powder, and the paste it becomes once wet out.

The Two Questions That Come Before Colour

Colour is the third question. Two come first, and a no to either one ends the discussion before shading is reached.

The first is market access: can this form be listed in the market you sell into? The powder range is listed for face and eye-area use. The finest paste grades are listed for nail use, and the paste also serves industrial coatings and printing. If your product touches skin near the eyes, that distinction helps determine which form to consider.

The second is logistics: can this form reach your factory? The paste is classified as dangerous goods, and sample and shipment release are confirmed with our documentation team first. This is the point buyers most often meet after a price has been agreed: the forwarder still needs to be considered. Ask early, with a destination port in mind, so the shipping route can be checked.

Both questions have the same shape. They are yes or no, they are settled before colour, and a no on either means the rest of this page belongs to someone else's process.

If the paste is headed for an industrial coating rather than a nail or print job, the wider context is our pigments for paints and coatings range.

And if the finish you actually want is a pearlescent metallic look rather than true metal flake, this is the fork: metal luster series.

Close view of fine silver aluminum pigment powder surface

Fig. 3 — The silver face of the dry powder, close in.

Where aluminum powder and silver paste diverge on market listing and transport class

Fig. 4 — Where powder and paste diverge on market listing and transport class.

Where the Paste Splits by Carrier

The paste is not one product in several colours. It splits by what carries the flake, and the carrier helps determine which application it belongs in.

Paste Carrier and effect Where it belongs
Nail, fine particle Finest cut, mirror face Nail systems
Solvent type Solvent carrier, standard mirror Coatings and printing that already run solvent
Waterborne Water carrier, passivated surface Systems that must be water-based
Holographic, solvent Embossed diffraction pattern, solvent carrier Accent effects in solvent systems
Holographic, waterborne Embossed pattern, passivated, water carrier Accent effects in water-based systems

Waterborne is not the solvent grade with the solvent swapped out. Aluminum reacts with water and gives off hydrogen, so untreated flake will do exactly that in a water-based binder. The waterborne grades are passivated at the surface to limit it. Treat the waterborne paste as a different material, not a substitution.

The holographic grades work by a different mechanism again. The diffraction pattern is embossed onto the flake rather than carried as a dye, so shear is not only a dispersion question for them — it is an appearance question.

Choosing between them is therefore a question about your system rather than about the effect. The binder, the film weight and the substrate all narrow the carrier before colour is reached, which is why a colour name on its own rarely identifies the right paste.

The fine-particle paste is listed for nail work — pigments for nail art.

Aluminum silver paste being poured over test parts before cure

Fig. 5 — Paste poured over test parts: the form you can meter into a batch.

Mirror silver and gold aluminum pigment finishes on shaped sample parts

Fig. 6 — Mirror silver and gold reading on curved parts.

Mirror silver paste split by carrier into nail, solvent, water and holographic paste

Fig. 7 — The paste split by carrier, and what each carrier rules in or out.

Mixing Rules That Change With the Form

Powder can be dry blended or dispersed at low shear. Keep the flakes intact during dispersion.

Paste goes in last, and is thinned first. Dilute it in a portion of the carrier before adding it to the main batch, then stir at low shear. Adding it last reduces its contact with water and with reactive components in the batch.

Apply thin coats in several passes rather than one heavy coat.

Holographic grades are shear-sensitive for the reason above. Low shear, added last, and no ball milling if you want the pattern back on the finished surface.

If you would rather buy a form you can disperse yourself, epoxy resin color powder is another option.

Set the Load Rate From Your Print Method

Load rate follows the application rather than a single house figure. Screen printing uses 20–50% pigment by weight, gravure 20–30%, and spray at 10% or below. The binder and film weight help determine where inside those ranges to start.

Run a loading series on your substrate to determine a suitable level for the process. Two systems using the same paste at the same percentage can still read differently, because the film weight and the substrate are doing half the work.

Print work and its load ranges sit with our pigments for printing range. Manufacturing is certified to ISO 9001:2015, and further documentation is provided on request.

The powder range, its size cuts and its applications are set out in the catalog: Aluminum Pigment Powders.

Aluminum pigment powder colour range laid out for colour selection

Fig. 8 — The powder colour range as it is presented for selection.

Questions Buyers Ask Before Ordering

Can it go into a water-based system?
Only the waterborne paste grades. Untreated aluminum gives off hydrogen in water, and the waterborne grades are passivated to limit it. Powder into a water-based binder needs checking for compatibility.

Holographic or standard mirror silver?
Holographic carries a diffraction pattern embossed onto the flake; mirror silver is a plain reflecting face. The pattern can be damaged by excessive shear.

Can powder and paste be swapped?
No. They have different market listings, transport rules and mixing rules. Swapping one for the other changes your qualification, not only your handling.

Request a Sample

Before a sample leaves us, we need the market you sell into, the form you are considering and how you apply it. If the form is paste, the destination port comes with it, because the sample is released only once the dangerous-goods route is confirmed.

Send those four points and we will confirm the grade and the shipping route together — tell us your market, your form, your application and your port, and we will answer with the paste or powder that fits it.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

aluminum pigment
Aluminum Pigment: Face-Safe Powder and Mirror Silver Paste

Dry powder listed for face and eye-area use, plus mirror silver paste in solvent, water and holographic grades. Confirm market and shipping class first.

Read More
metallic color paste
Metallic Color Paste: Water, Solvent and Epoxy Grades

Water-based, solvent-based and matte epoxy color pastes: which carrier your system takes, how to judge the addition level, and what each looks like cured.

Read More
rainbow violet crystal pigment
KT-T60-22-WR Rainbow Violet XiallicSparks Pigment

KT-T60-22-WR Rainbow Violet XiallicSparks is our direct equivalent to Xirallic T60-22 — an al2o3 violet effect pigment built on aluminum oxide flake substrate rather than mica. With a refractive index of 1.76 and a 6–30 μm particle size, it produces the sharp, faceted crystal sparkle that defines high-end automotive basecoat finishes. Where mica-based pigments deliver a soft diffuse glow, this grade gives you tight, mirror-like highlights with exceptional chroma and color purity in a Rainbow Violet effect.

Read More
xirallic replacement galaxy blue
KT-T60-23-WR Xirallic Replacement Galaxy Blue Pigment

KT-T60-23-WR is our alumina-based xirallic replacement galaxy blue pigment, engineered as a direct drop-in alternative to Merck Xirallic T60-23. Built on a high-refractive-index Al₂O₃ crystal substrate (RI 1.76) with a 6–30 μm particle range, it delivers a faceted, crystal-clear blue sparkle in automotive basecoat systems — the kind of depth and brilliance that mica-based pigments structurally cannot match.

Read More
xirallic equivalent rainbow green
KT-T60-25-WR Rainbow Green XiallicSparks Pigment

KT-T60-25-WR is an alumina (Al₂O₃) crystal-effect pigment in our XiallicSparks series, producing a vivid Rainbow Green sparkle with the kind of faceted, high-brilliance character you see in top-tier automotive OEM finishes. With a 6–30 μm particle size range and an Al₂O₃ substrate refractive index of 1.76 — significantly higher than standard mica — this rainbow green Al₂O₃ pigment delivers exceptional chroma and clarity in basecoat/clearcoat systems, at factory-direct pricing.

Read More
xirallic equivalent rainbow purple
KT-T60-26-WR Rainbow Purple XiallicSparks Pigment

KT-T60-26-WR Rainbow Purple is an alumina-based crystal-effect pigment from our XiallicSparks series, producing a vivid rainbow purple sparkle in automotive basecoat-clearcoat systems. Built on an Al₂O₃ flake substrate — not mica — it delivers higher chroma, sharper highlights, and better flake orientation than conventional pearl pigments. With a particle size range of 6–30 μm and a D50 of 9–11 μm, it is engineered specifically for high-end automotive OEM and refinish applications where a distinct, crystal-like purple sparkle is the design intent.

Read More
xirallic equivalent pigments
Wholesale XiallicSparks Pigment for automotive coatings and industrial finishes

XiallicSparks is Kolortek's line of aluminum oxide effect pigment available in bulk supply, engineered as direct alternatives to Merck Xirallic® in automotive OEM and premium industrial coating applications. Built on an Al₂O₃ flake substrate rather than mica, the series delivers the faceted, crystal-like sparkle that defines high-end automotive finishes — at factory-direct pricing that typically runs 20–40% below Merck equivalents for comparable performance. If you're evaluating a xirallic alternative wholesale source, this is the product line to assess.

Read More
aluminum oxide pigment
Xirallic Equivalent Pigment factory direct supply

If you're sourcing a xirallic equivalent factory direct and need the same aluminum oxide crystal substrate that drives Merck Xirallic's signature faceted sparkle, Kolortek's XiallicSparks series — product codes KT-T60 and KT-F60 — delivers that effect at 20–40% lower cost than branded equivalents. With eleven grades covering colors from Galaxy Silver to Flame Copper, particle sizes of 6–30 μm, and factory-direct supply from our manufacturing base in China, these are purpose-built alternatives for automotive coating formulators who want performance without the Merck price tag.

Read More